When switching the nylon zipper, sometimes the zipper can not move because the pull head clips the cloth. At this time, if you blindly pull the chain, it will only make the cloth card tighter, so as far as possible to pull the cloth stuck in the pull head and then pull the pull head back to the original position, if it is completely stuck, do not use too much force, as long as slowly pull up. In addition, when sewing the zipper, it is also necessary to pay attention to the smooth sewing.
When wearing and taking off clothes, please wear and take off when the nylon zipper is fully opened. It will be smoother to fasten the button or the pant hook before the zipper. If the pull head stops in the middle of the chain teeth, it is easy to cause the zipper solid barrier. Long boots, gloves and clothing with zippers should also pay more attention to reduce trouble.
In addition, in daily life, we also need to understand the simple repair method of nylon zipper head. First pull down a big tooth on the top of the zipper with pliers, both sides should be pulled; Then pull the zipper to the top; Then bring the two sides of the teeth together.
Then put the nylon zipper zipper head into it, if it is not really set into, cut a small hole on the diameter line, remember, do not cut in the place where the teeth should be cut on the above place, otherwise the teeth can not be installed; Put the big teeth in, zip the head in.