The cabling phenomenon of the zipper head usually occurs in the following situations:
1. When switching the zipper, sometimes the zipper can not move because the zipper head is clipped to the cloth. At this time if blindly strong pull chain. It will only make the cloth more tight, so as far as possible to pull the cloth stuck in the pull head and pull the pull head back to the original position, if it is completely stuck, do not use too much force, just slowly pull up. In addition, when sewing the zipper, it is also necessary to pay attention to the smooth sewing.
2. When wearing and taking off clothes, please wear and take off when the zipper is fully opened. It is best to fasten the button or pants hook and then the zipper will be smoother, if the zipper head stops in the middle of the chain teeth, it is easy to cause zipper solid barrier. Long boots, gloves and clothing with zippers should also pay more attention to reduce trouble.
In addition, in daily life, we also need to understand the simple repair method of zipper head, let's introduce the following steps:
1. First pull down the top tooth of the zipper with pliers, on both sides.
2. Pull the zipper head to the top.
3. Then bring the two teeth together.
4, and then put the zipper head in (there is a certain difficulty. If you really can not fit, cut a small hole in the diameter line, remember, do not cut in the place where the big teeth should be cut against the top place, otherwise the big teeth will not fit up).
5. Put the teeth on and zip the head inside.